Spectrum-controls 140 ACI 052 00sc Uživatelský manuál stáhnout pdf (Strana 57)

STEP 4: Check the modules communication status.

VERIFY: The modules green ACTIVE LED is on. This indicates that the

module is communicating properly with the rack.

CORRECTIVE ACTION:

 Set the rack into run mode.

 Reinstall the module in the rack.

STEP 5: Check the modules health status.

VERIFY: The module is reported as healthy in the Modsoft I/O map Screen.

Check to make sure that the module description, slot location, and

recognized and reported as healthy. If an asterisk is present before

the modules name, then the module is not recognized by the rack.

CORRECTIVE ACTION:

 Reinstall the module in the rack.

 Reselect the module in the I/O Map using the <Shift + ?> key. If the module

is not listed, install the Modsoft Runtime files included with your module.

STEP 6: Check the modules register operation.

VERIFY: The 4X configuration word and the 3X+8 Status word are setup

properly. As a quick check, disable all ladder programming and set

the 4X register to 0000 Hex and verify that the 3X+8 Status register

cycles through the values 0000, 0001, 0010, and 0011 Hex.

CORRECTIVE ACTION:

 Check steps 1 through 6 above and then call Spectrum Controls Customer

Satisfaction at (425) 746-9481.

Installation Instructions

32-Channel Analog Input Module

Quantum 140 ACI 052 00sc

1 2 ... 52 53 54 55 56 57 58 59 60 61 62

Žádné komentáře

Spectrum-controls 140 ACI 052 00sc Uživatelský manuál Strana 57